Starting your family tree

How to make a family tree, starting with what you know

Start with yourself, then parents, partners, children and siblings. Ask relatives before the records, and mark every date and fact with how sure you are.

Updated 10 November 2026Checked against GEDCOM 7, FamilySearch help, US National Archives and GRO guides, Nov 2026

Short answer

To make a family tree, write down yourself first, then your parents, your partner and children, then your brothers and sisters. Ask older relatives what they remember before you search any records. Write uncertain dates as "about 1880" or "before 1900", and note where each fact came from and whether it's sure, likely or a guess.

The mistake that's hardest to undo later is writing a guess as if it were a fact. Once "1880" sits on the chart with no note, nobody remembers it was your gran's estimate, and you'll end up searching the wrong year's records for it.

Start with yourself and work outwards

The US National Archives sums up the method in one line: "Start with yourself, the known, and work toward the unknown". In the order below, every new person joins someone already on the tree, so no one ends up floating loose.

  1. Write yourself down with your full name and your date and place of birth.
  2. Add your mother and father, each with their own birth details. Enter each woman who changed her surname on marriage under the one she was born with, as FamilySearch's help advises. Married names go in the person's other names or a note.
  3. Add your partner, or each partner in turn, and then your children, with each child linked to the right pair of parents.
  4. Add your brothers and sisters. They share the parents you've already entered, so each one goes under that couple.
  5. Go up a generation by adding each parent's parents, then each parent's brothers and sisters (your aunts and uncles).
  6. Keep going up one generation at a time, finishing one couple before you start the next.

For each person, the US National Archives names four things to collect: names, dates, places and relationships. If you know nothing about someone, leave the space blank. If you have a reason for a guess, write it down and mark it as a guess (see below).

Ask living relatives before you put their details anywhere other people can see.

Ask relatives before you go to the records

A relative can tell you which town the family came from. Without that, a records search has nowhere to start. The US National Archives also points out that "more often than not, others before you have gathered data" about your family. So the first thing to ask is whether anyone has already started a tree, or kept a family Bible or a box of papers.

  • Talk to the oldest relatives first. Their memories go back furthest.
  • Ask about one person at a time, by name: when they were born, where they lived, what work they did, who they married.
  • Ask to see papers and photographs. The US National Archives' list of things to look for at home includes letters, diaries, scrapbooks, newspaper clippings and "backs of photographs".
  • Write down who told you each thing, and when, while you're still talking to them. You'll need it for the source note.

Once relatives run out of answers, you'll usually turn to a birth, marriage or death certificate or a census entry next.

Write uncertain dates in words

A plain year means you're sure of it, so only write one when you are. For anything else, use one of the forms below. Each has a matching keyword in GEDCOM 7, the file format family tree programs use to swap trees. Use your program's own "about" or "before" option where it has one. We haven't checked how each program exports words typed into a note, and they may not come out as a keyword.

What you know Write it as GEDCOM keyword What the standard says it means
Roughly when, from memory or a story about 1880 ABT "Exact date unknown, but near" the year
It had happened by a certain year before 1900 BEF "Exact date unknown, but no later than" the year
It happened after a certain year after 1871 AFT "Exact date unknown, but no earlier than" the year
Somewhere inside a span between 1878 and 1882 BET ... AND A range with both ends set
Worked out from an age on a document calculated 1846 CAL The year "is calculated from other data"

Use "calculated" whenever you've done some arithmetic, because "about" hides the fact that you did. Take a made-up example: a death certificate from 1880 gives the age as 34, so the person was born in 1845 or 1846, depending on whether they'd had their birthday that year. 1880 minus 34 gives 1846, so write "calculated 1846" and add a note that 1845 is just as possible. The age itself came from the informant and can be wrong, so search a few years either side. Never write a bare 1846.

Note where each fact came from and how sure you are

The GEDCOM standard's certainty scale puts "interviews, census, oral genealogies" together under "questionable reliability of evidence", one level below "secondary evidence". A census entry sits on the same level as what your aunt tells you on the phone.

Give every fact a source note and one of three marks, set by the evidence behind it:

  • Sure: a document made at the time by someone who was there or recording it officially, for example the date a death was registered on the certificate.
  • Likely: an informant's account, a document made later, or a figure you've worked out from one of those.
  • A guess: nothing written or remembered backs it up yet, or it's your own estimate with no record behind it.

GEDCOM's four levels map onto these three marks: sure is its top level, a guess its bottom ("unreliable evidence or estimated data"), and likely covers the two in between.

Ages and birth years on a census or a death certificate are likely, not sure, because someone else supplied them. On a death certificate from England and Wales, the GRO's guide says the informant gave the age "to the best of their knowledge. This is not always correct." So "calculated 1846" in the example above is likely: the sum is yours, but it rests on the informant's figure. A named relative's memory is likely too, however clearly they remember it. A family story that nobody can trace back to a teller is a guess.

A source note also says where that source is kept now. For example: "Aunt June (made-up name), phone call, 3 March 2026" or "death certificate, informant Mary Ward (made-up name), original in the blue folder". Name the informant on a certificate, because that person gave the details and may have got them wrong.

When two sources disagree, keep both. Enter each one as its own event with its own source, for example two birth events with different dates. Put the one you believe first, and add a note saying why you prefer it.

Keep the tree in a format you can move

A sheet of paper works for the first sitting. Once the tree spreads beyond one page, move it into family tree software that can export a GEDCOM file. The standard was written partly as "a long-term storage format for preserving genealogical information in an open, standard format", so your sources and date wording aren't stuck with one company. If all you want is a three-generation chart for a birthday card, skip the software and keep it on paper.

Families that don't fit the simple order

  • Children who were adopted or fostered: record the relationship type next to each parent. If you know both the birth parents and the adoptive parents, enter both.
  • Half and step relatives: link each child to the right pair of parents, and the half or step relationship then shows on the tree. The guide to half siblings and step siblings shows how to draw each case.
  • Someone with more than one partner: enter each partnership separately, with its own children under it.
  • The same name in every generation: add the birth year to the name in your notes ("John Ward, b. about 1880"). Fathers and sons called John are easy to merge by mistake.

Once aunts, uncles and their children are on the tree, the cousin calculator works out what to call each of them.

More on starting your family tree

All starting your family tree guides
How we made this guide

Carbonado Apps wrote this guide with the help of AI research tools. We checked it against GEDCOM 7, FamilySearch help, US National Archives and GRO guides, Nov 2026, using the sources listed below. We make Treehold, and we wrote this to be useful whether or not you ever use it. If something here is wrong or out of date, email hello@carbonado.app and we'll correct it.

Sources (4)
  1. How to Begin Genealogical ResearchU.S. National Archives (National Archives at Riverside)
  2. How do I enter names in Family Tree?FamilySearch
  3. The FamilySearch GEDCOM Specification, version 7.0FamilySearch
  4. Guide to death certificates (accessible)HM Passport Office, General Register Office (GOV.UK)
TreeholdA family tree the whole family can see and add to from one link.
Get told at launch