How to draw a family tree on paper, with the symbols that matter
How to lay out a family tree by hand: lines for couples and children, symbols for divorce and adoption, where a second partner goes, and fitting the page.
To draw a family tree on paper, put each generation on its own row. Join each couple with a double line (=====), then drop one line from its middle to a bar holding their children, eldest on the left. Start at the top centre of the sheet and keep each sheet to three or four generations.
Width is the catch. Brothers, sisters and all their cousins share one row, so the youngest generation is the one that runs off the edge. Count the names on your most crowded row before you pick up a pen, because that row sets the width of the sheet.
Pick the chart before you draw
Decide first which people the tree is for. If you only want your direct ancestors (parents, grandparents and so on), draw a pedigree chart. Its shape is fixed, because everyone has 2 parents, 4 grandparents and 8 great-grandparents, as a guide to genealogical charts by the International Institute of Genealogical Studies puts it. For a couple and all their descendants, you want the other kind, the drop-line chart. The Institute's guide calls it "probably the most easily understood" chart. Every family's shape is different, so there's no printed blank form for it, and you lay it out yourself.
For a decorative tree with a trunk and branches, the Institute's guide puts the oldest couple at the top with each generation on a lower branch, or starts at the base of the trunk and works upwards.
Beside each name, decide how much to write. The Institute's advice is that years of birth and death alone are "a good compromise" that keeps the chart compact. Leave the full dates and places for a separate family record. If you do write full details, the Institute's British example writes SURNAMES in capitals, dates as day, three-letter month and year (12 Jan 1960), places as parish and county, and abbreviations such as b. (born), bur. (buried), c. (christened), d. (died) and m. (married). It notes that North American charts drop the full stops after those letters.
Draw couples, children and siblings
The Institute's drop-line example grows downwards from the oldest couple. Clinical pedigrees work differently: a review for doctors by the genetic counsellor Robin L. Bennett in the Journal of Community Genetics starts from the patient in the middle of the page and grows up and down.
- Write the oldest couple side by side near the top centre of the sheet.
- Join the couple with a long double line (=====). Put the marriage date and place under the wife's name, which leaves room to show a second marriage later.
- Draw one vertical line down from the middle of the =====. This is the drop line that gives the chart its name.
- Draw a horizontal bar under it and hang the children from the bar with short vertical lines, in birth order from left to right. The Institute's guide puts siblings, first cousins and second cousins all on one row, with parents, aunts and uncles on the row above. Keep to that, or readers can't tell the generations apart.
- For each child in your direct line, put their husband or wife on the same row and join them with =====.
- For a brother or sister of your direct line, the Institute's guide saves space. It writes only the spouse's name, under the marriage date, and drops that couple's children's line from under the parent's death date.
- Leave a gap beside each person who might still marry or have children. The University of Iowa's pedigree guide tells you to "leave space to add any partners and children" when you draw siblings. Without those gaps, a late marriage means redrawing the row.
- Draw a key in the lower left corner, where Iowa's guide puts it, and list every line and mark you've used. Two families' charts can use different symbols for the same thing, so the key is what lets a relative read yours.
Symbols for marriage, divorce, adoption and doubt
Genealogy charts and clinical pedigrees disagree on marriage, divorce and adoption. The Institute's guide gives a British example of a genealogy drop-line chart. Clinical pedigrees follow the standard of the US National Society of Genetic Counselors (NSGC), here as summarised by Switzerland Omics' catalogue of the NSGC notation and the Iowa guide. The sharpest clash is the double line: on a genealogy chart ===== means married, and on a clinical pedigree it means the couple are blood relatives.
| Situation | Genealogy drop-line chart (Institute guide, FamilySearch Wiki) | Clinical pedigree (NSGC) |
|---|---|---|
| Married couple | Double line ===== between them | Solid single horizontal line between them |
| Relationship ended | Not covered in its drop-line notes. Its narrative Spencer example writes "m. diss. by div." with the year | A slash through the line between them |
| Couple related to each other | Not covered | Double line, with the relationship written above it if it isn't obvious |
| Adopted child | Zigzag line down to the child | Child in square brackets, dashed line from the adoptive parents |
| Child born outside marriage | Wavy line, with the father's name beside it if known | Not in the NSGC summaries cited |
| Parentage unsure | Broken line | Not in the NSGC summaries cited |
| Possible brother or sister | Dashed line joining them to the siblings | Not in the NSGC summaries cited |
| Children you can't name or fit | The word "Issue" under a short line, or a downward arrow | A number inside the symbol, such as "5" for five males |
For a divorce, draw a short slash across the line between the couple and write "div." with the year under the marriage details. Say in your key that ===== means married. If the chart may go to a genetic counsellor (for a family health history, say), draw marriages with a single line.
The Institute's guide also says not to draw angled lines. When a drop line has to reach a child who isn't directly below, "jog" it: down, across, down again, in right angles.
Fit a second partner on the same row
Put the person who married twice in the middle, with the first partner on one side and the second partner on the other. That placement is our advice. It keeps each ===== short. The Institute's example numbers the marriages 1 and 2 above the =====, with each marriage's date and place under the wife's name. Each marriage gets its own drop line and its own bar of children. Switzerland Omics' summary of the NSGC notation says the same: children from different relationships "must connect to their corresponding union". Where half siblings and stepchildren go is covered in half siblings, step siblings and how to draw them.
Children who were adopted or fostered
Use the NSGC form for adoption even on a genealogy chart: square brackets round the child's name and a dashed line down from the adoptive parents. The brackets mark the person as well as the line. A zigzag gets lost where lines cross. If a child was adopted out of the family you're drawing, the NSGC rule is to bracket the name and keep the solid line to the birth parents.
Neither set of conventions above has a separate mark for a child who lived with a family without being adopted. Use a dotted line, so the child doesn't look adopted, and write the years they lived with the family beside it. Dashed, broken and dotted lines look alike in pencil, so give each its own job: long dashes for adoption, short dashes for unsure parentage, and dots for a child who lived with the family. A possible brother or sister also gets short dashes, but that line runs across along the sibling bar, not down from the parents. Draw a sample of each in your key.
Stop the page running out of room
- Keep each sheet to three or four generations. The Institute's guide calls it "a very successful technique" to then "bud off" each person on the bottom row as the head of their own tree on a new sheet. Write "see sheet 2" under the name, so the sheets join up.
- Limit a sheet to one surname. The Institute suggests leaving out the descendants of married daughters, since they appear on their husbands' family trees. If you're drawing for your mother's side, that rule cuts the wrong people, so apply it only to branches you don't need.
- For children you can't name or fit, use a shorthand from the last row of the table. Put it at the foot of the parent's drop line, not in a margin, so it's clear whose children they are.
- Draw the first version in pencil on scrap paper, and plan on a clean second copy once you know your tree's real shape. Clinicians redraw too. In her tips for drawing a genetic pedigree for NHS England's Genomics Education Programme, the genetic counsellor Megan Rogers tells them that "you can re-draw the family history" after clinic.
A tree that fits on two or three sheets is best left on paper. The Institute's guide notes that computer programs take newly found branches without you having to "scrunch it into, or cut up" a finished chart. Treehold, the family tree app we're designing, is being built to keep one shared tree the whole family can add to. If you're moving off paper now, start with how to make a family tree.
More on starting your family tree
- How to make a family tree, starting with what you knowStart with yourself, then parents, partners, children and siblings. Ask relatives before the records, and mark every date and fact with how sure you are.
- How to trace your family tree, one generation at a timeTrace your tree through certificates, censuses and parish or vital records, with the free routes in England and Wales, and how far back you'll get.
How we made this guide
Carbonado Apps wrote this guide with the help of AI research tools. We checked it against IIGS guide (2024 archive, live down), NSGC summaries by Iowa, Switzerland Omics, Nov 2026, using the sources listed below. We make Treehold, and we wrote this to be useful whether or not you ever use it. If something here is wrong or out of date, email hello@carbonado.app and we'll correct it.
Sources (5)
- Genealogical Charts - International InstituteInternational Institute of Genealogical Studies, on the FamilySearch Wiki (archived copy, April 2024)
- The family medical history as a tool in preconception consultationJournal of Community Genetics, via PubMed Central
- How to Draw a PedigreeIowa Institute of Human Genetics, University of Iowa
- Standardised pedigree notationSwitzerland Omics
- Family matters: Top tips for drawing a genetic pedigreeNHS England Genomics Education Programme
